• - Recirculating Water Treatment Technology

  • - Cost Saving on Chemicals at Recirculating Water System

  • - Non-Electricity, free maintenance

Image 1
Image 2

Engineering Application Value

3ENF HF membrane can simplify process equipment and reduce footprint in engineering applications,greatly reducing the costs.

➢ Anti-fouling:

With smooth flow channel, no strict requirements of feed water, and free of pretreatment with UF membrane

➢ Chemical resistance:

Oxidation chemical can be used to reduce fouling, maintaining stable flux and extend membrane life

➢ Dense and smooth surface:

Surface will not be easy to be damaged by slight scratches, and can work normally in harsh environments

The Unique Advantages of 3ENF Membranes

NF membranes have larger pore size than RO membranes, thus the osmotic pressure is smaller than that of RO membranes, which reduces filtration resistance, so they have the following unique advantages that RO membranes lack:

➢ High recovery rate and less concentrated wastewater

➢ Low operating pressure reduces energy consumption in water treatment system

➢ No UF membrane pre-filtration, less equipment footprint and investment

Lower Investment in Fixed Assets

The equipment is cheap and occupies less space

Lower Operation Costs

System operation pressure is low, not easy to damage and less repair

Higher Water Recovery

Special structure of selective layer, low osmotic pressure and high recovery

Special Advantages Related Causes (Primary) 3ENF Conventional UF/RO Other NF
1 Available low-pressure backwash Uncoated HF membrane structure √ X √
2 Anti-biofouling* Smooth and dense surface, less algae adhesion √ X X
3 Resistant to oxidation and acid-base corrosion Special material of selective-layer √ X X
4 Anti-fouling and scaling* Super hydrophilic, smooth and dense selective-layer √ X X
Note

√ Smoother surfaces are less prone to fouling

√ Improved hydrophilicity of the membrane surface provides better resistance to fouling

√ A lot of dirt is hydrophobic in nature

SiliFIoc is an environmental friendly by- brid product to solve the industrial effluent problem. SiliFloc offering simultaneous reaction of coagulation and flocculation in a single process while treating the industrial wastewater. SiliFIoc is an alternative product to replace the existing chemical based Coagulant and Flocculant used in the industrial wastewater treatment plant such as Aluminium Sulphate (Alum), Polyalumi- num Chloride (PAC), Ferrous Sulphate, Ferric Chloride and Ionic or Non-ionic Polymer. SiliFloc provides excellent performance and it is proven to reduce the industrial pollutants and generate less sludge.
Image 1
Image 2

To encourage and promote co-operation in the following areas :

  • (a) Student internship;
  • (b) Staff attachment;
  • (c) Industrial visit;
  • (d) Industrial Advisory Panel;
  • (e) Joint research;
  • (f) Joint conference/seminar;and
  • (g) any other areas of co-operation to be mutually agreed upon by the Parties.
  • (h) Double tax deduction program for customers
Tech 3
Tech 4